كتاب ممتاز يشرح برنامج bullet proof ftp server  لتحويل الجهاز إلى سيرفر FTP.
CONTENTS
Chapter 1. Topology and USB Device ................................................................................................................ 2
1.1 Typical Topology ...................................................................................................................................... 2
1.2 Special Topology ...................................................................................................................................... 3
1.3 USB Device ............................................................................................................................................. 4
Chapter 2. Configuration of the Wireless Router .............................................................................................. 5
Chapter 3. Access via Web Browser ................................................................................................................ 11
3.1 WAN Access .......................................................................................................................................... 11
3.2 LAN Access ........................................................................................................................................... 16
Chapter 4. Access via PC Client Software ....................................................................................................... 22
4.1 WAN Access .......................................................................................................................................... 22
4.2 LAN Access ........................................................................................................................................... 27

كتاب ممتاز يشرح برنامج bullet proof ftp server  لتحويل الجهاز إلى سيرفر FTP.

Note:
Here in this guide, we take the configuration procedures of TL-
WDR4300 for example.
1.1
Typical Topology
Figure 
1-1 Typical Topology

Not
e: 
1. USB Flash Device stands for FTP Server in this topology. 
TL
-
W DR4300
Appli
cation
Guide
- 3 - 
2. Local PC here means
 the PC t
hat is in the same subnet with the FTP Sever. 
Local PC can access the FTP 
Server by LAN (Local Area Network)
, which
 is called 
LAN Access.
3. Remote PC here means
 the PC t
hat is not in the same subnet with the 
FTP Sever.
 Remote PC needs
 to go 
through the Internet if needed to access the FTP server
, which
 is called 
WAN Access.
1.2
Speci
al Topology
Figure 
1-2 Special Topology
TL
-
WDR4300
Appli
cation
Guide
- 4 - 

Note:
The WAN port of TL-
WDR4300 
is linked to the LAN port of an xDSL modem. If the modem has already obtained 
a public IP by dialing to the Internet with the username and password provided from your ISP and TL
-WDR4300
obtains
 its IP through Dynamic IP serv
ice provided by the modem
, the remote PC cannot reach the FTP server 
through  the  WAN  IP  of  TL
-WDR4300
  because  the  WAN  IP  of  TL
-WDR4300 
is  not  a  public  IP  in  case  of  this  
situation. 
Yo u
 can consult the vendor of the modem to modify some settings to let the 
TL
-WDR4300
 obtain public 
IP or assign a specific port for FTP server application with private IP.
1.3
USB Device
The USB Flash Device taken
 for example here is Kingston 1GB USB Flash with one volume 
which 
includ
es 3 
folders 
(tplink01
, tplink02, tplink03)
 and 3 
files 
(test01.doc
, test02.doc, test03.doc
).   
The following 
part
 would help you set up a FTP server and download the files from the FTP server through a USB 
Flash
.    
Appli
cation
Guide
- 5 - 
Chapter 2.
   Configuration of the Wireless Router
To set up your FTP Server, please follow the ins
tructions below:
1. Make sure you have a PC connected to 
the wireless router
, either through 
wireless 
connection 
or wired 
connection. 
2. Plug an external USB hard disk drive or USB flash drive into the USB port
 on the back panel of the Router
.   
3. Open a 
Web brows
er and type the Router’s default domain name 
http://tplinklogin.net
 in the address field to log 
in the 
Web-based 
configuration utility
. Then press 
Enter
 key
.   
Figure 
2-1 Type in Default Domain Name
4. After a moment, a login window will appear. Enter 
admin
for the User Name and Password, both in lower case 
letters. Then click the 
OK
 button or press the 
Enter
 k e