كتاب Heat And Sound Insulation Materials

MASTERPLAST GROUP INTERNATIONAL 3 HEAT AND SOUND INSULATION MATERIALS 2MASTERPLAST GROUP INTERNATIONAL HEAT AND SOUND INSULATION MATERIALS ISOMASTER® EPS thermal- and sound insulation materials are made of expanded polystyrene, which are durable and has good thermal resistance, thanks to its special cell structure. The designation in the name of the product refers to the compressive strength of the material. Easy to work and form the material, that is applicable between (–)65°C – (+)85°C, but the installation of it is not recommended, where the temperature long-time exceeds (+)70°C. In places exposed to humidity, the application of these products is not offered, because the moisture degrades their thermal resistance. They contain flame-retardant additives and belong to Euroclass “E” (according to EN 13501-1), they are not dripping during combustion and are self-extinguishing after elimination of direct flame effect. The product is not environment depleting, but its mechanical protection after installation is necessary. ISOMASTER® EPS boards are available in boards (50 × 100 cm). EPS 30 EPS Fields of application: Non-loadable thermal insulation board, as non-passable insulation of loft spaces, among wooden battens under OSB sheet boarding, in expansions gaps of buildings. Marking: blue line Compression strength (10%): 30 kPa Declared thermal conductivity (λD): 0.04 W/mK Water vapour resistance factor (μ): 20-40 Designation: EPS EN 13163-T1-L1-W1-S1-P4-DS(70)3-BS50-CS(10)30-DS(N)5 Width Available Code 2 cm 0,24 m3/bale, 24 pcs/bale 0501-03002000 3 cm 0,24 m3/bale, 16 pcs/bale 0501-03003000 4 cm 0,24 m3/bale, 12 pcs/bale 0501-03004000 5 cm 0,25 m3/bale, 10 pcs/bale 0501-03005000 6 cm 0,24 m3/bale, 8 pcs/bale 0501-03006000 7 cm 0,245 m3/bale, 7 pcs/bale 0501-03007000 8 cm 0,24 m3/bale, 6 pcs/bale 0501-03008000 10 cm 0,25 m3/bale, 5 pcs/bale 0501-03010000 12 cm 0,24 m3/bale, 4 pcs/bale 0501-03012000 EPS 70 EPS H-80 Fields of application: thermal insulation under moderate load. In ventilated cold roof structures, with ventilated air gap behind assembled façade covering; with or without a ventilated air gap in double-layer masonry; on the lower plane of a slab with or without covering, among wooden battens under OSB sheet boarding. Marking: 2 × blue line Compression strength (10%): 70 kPa Declared thermal conductivity (λD): 0.038 W/mK Water vapour resistance factor (μ): 30-40 Designation: EPS EN 13163-T1-L1-W1-S1-P4-DS(70.-)3-BS115-CS(10)70-DS(N)5 With Available Code 2 cm 0,24 m3/bale, 24 pcs/bale 0501-07002000 3 cm 0,24 m3/bale, 16 pcs/bale 0501-07003000 4 cm 0,24 m3/bale, 12 pcs/bale 0501-07004000 5 cm 0,25 m3/bale, 10 pcs/bale 0501-07005000 6 cm 0,24 m3/bale, 8 pcs/bale 0501-07006000 7 cm 0,245 m3/bale, 7 pcs/bale 0501-07007000 8 cm 0,24 m3/bale, 6 pcs/bale 0501-07008000 10 cm 0,25 m3/bale, 5 pcs/bale 0501-07010000 12 cm 0,24 m3/bale, 4 pcs/bale 0501-07012000 Fields of application: Thermal insulation of external thermal insulation systems, covered with proper finishing coat (e.g. acrylic or silicone rendering). Marking: red line Compression strength (10%): 80 kPa Declared thermal conductivity (λD): 0.038 W / mK Water vapour resistance factor (μ): 25-40 Designation: EPS EN 13163-T2-L2-W2-S2-P4-BS125-CS(10)80-DS(N)2-DS(70)1-TR150 With Available Code 2 cm 0,24 m3/bale, 24 pcs/bale 0501-08002000 3 cm 0,24 m3/bale, 16 pcs/bale 0501-08003000 4 cm 0,24 m3/bale, 12 pcs/bale 0501-08004000 5 cm 0,25 m3/bale, 10 pcs/bale 0501-08005000 6 cm 0,24 m3/bale, 8 pcs/bale 0501-08006000 7 cm 0,245 m3/bale, 7 pcs/bale 0501-08007000 8 cm 0,24 m3/bale, 6 pcs/bale 0501-08008000 10 cm 0,25 m3/bale, 5 pcs/bale 0501-08010000 12 cm 0,24 m3/bale, 4 pcs/bale 0501-08012000 Other thicknesses on request
-
من الهندسة المدنية - مكتبة كتب الهندسة والتكنولوجيا.